Calibration Testing Services
State of the art certified testing labs for qualification/calibration of industrial products for local/export markets
EMC/EMI testing of Energy Meters & Commercial Products
Vibration Testing as per Industrial Standards
Thermal & Humidity Testing
ISO 9001:
2015 Certification
All Testing & Calibration Labs of QM are ISO 9001:2015 Certified.
1. MATERIAL TESTING
Mechanical Testing
- Tensile Testing
- Compression Testing
- Flexural Testing
- Shear Testing
- Impact Testing
- Hardness Testing
Metallurgic Testing
- Optical Emission Spectrometer
- X-Ray Fluorescence Spectrometer
- Metallurgical Microscopes
- Macro Examination
- Micro-Hardness Tester
- Heat Treatment of Metals/Alloys
2. Environmental Testing Facilities
3. Non Destructive Testing Facilities
X- Ray Radiography Testing:
Specifications:
- Directional X-Ray Tube Head
- Max Penetration in Steel: 64mm
- Max Voltage : 300KV
Capabilities:
- X-Ray of almost all materials
- X-Ray of Welding/Forging/Casting
- having simple geometry
Ultrasonic Testing
Specifications:
- Modes: Bond Test, Flaw Detection, Thickness
- Max thickness measurement: 1000mm
Capabilities:
- UT of Ferrous and Aluminum materials.
- UT of Welding/Forging/Plates
Liquid Penetration Testing
Specifications:
- Visual Solvent Removable method
Capabilities:
- DPT of Welding/Casting/Forging
- DPT of all non-porous materials for surface defects
Hydrostatic Pressure Testing:
Specifications:
- Max pressure: 200 bar
- Sensor: Strain, LDS and Pressure.
- Max Strain Channels : 24 (350 Ohm)
- LDS : 3 (50 x 1 , 100 x 2)
- Pressure Transducer : 5 (200bar x 2, 120bar x 2, 100bar x 1)
Capabilities:
- Hydrostatic testing of Pressure vessels (internal).
- Proof Pressure and Burst Testing of thin walled pressure vessels.
4. Calibration Facilities
- Mass Calibration (1mg to 3000 Kg)
- Temperature & Humidity Calibration (-200 to 1200 C; 3-98% RH)
- Pressure Calibration (1-2600 bar)
- Vacuum Calibration (2x10-3 to 2x10-9 torr)
- Force Calibration (0.5 to 1000 Nm, 2227.2 KN)
- Linear & angular measuring instruments (0.5 mm to 500 mm, 45 deg)
Electronic Equipment Calibration
- Voltage: 0 to 1100 VDC; 220mV to 1100 VAC
- Resistance: 0 to 1.0GΩ
- Current: 0 to 11A (DC); 9uA to 11A (AC)
- Frequency: 0.1 Hz to 6.4 GHz